Routing

What impact will the daylight savings times changes that were recently announced have on router clocks if you are using and NTP server to accept the time from and you do use the following clock commands?clock timezone CST -6clock summer-time CDT recu...

877 router at client site set up as a DHCP server. For some strange reason some of the client PC's are getting DHCP addresses from our router. How is that possible and how do I stop it?

I've actually opened a forum before in-line to this bonded T1. In connection with this, i just want to verify that my information is correct.we've ordered 4xT1,the ISP provided to me the necessary config, using ppp each link. Obviously, i have 4 diff...

Dear All,Is the CCIE Routing and Switching Official Exam Certification Guide, Second Ed. enough to pass the written exam?Best Regards,Mounir Mohamed

The transmission set up (satellite) is HUB-Spoke ,with all the spoke sites receiving at the same frequency (outbound channel) and with a dedicated return channel. From a network point-of-view the different sites have their own sub interface with a de...

For CBWFQ, What will the queuing strategy be for the class-default inthe policy map, POLICYA ?policy-map POLICYA class class-default bandwidth 128a) FIFOb) WFQc) Best-effortd) Prioritye) CustomFrom reading the documentation, it seems to me that tha...

hello everybodyi have a job to do, and I'm not close on it.in a company there is a cisco 2950 "backbone" SW and it's connected to a checkpoint FW.now i need to add 2 cisco 2950 switches in another floor. i need to connect them each other with fiber, ...

I have a 1721 router with HWIC-4ESW as the external interface. The router NATs to the Internet and terminates 15 VPN's on this interface. Randomly the router will stop forwarding packets and on this interface which brings down the VPN's. No errors ar...

HiI am planning a new WAN and need to tag all packets using DSCP for our service provider to maintain an SLA. I need to forward and tag at at least 75Mbps. The router will only be doing BGP and tagging, nothing else.Will a 2821 router be able to cope...

Has anyone ran into this as well?Is there a different/new command?I am using ntp syntax to synch the time for all syslogs.

Hi,I need to route to a destination (10.1.2.2) only when two interfaces are up(vlan 1 & vlan 2) and when any one of these interfaces are down packets must use a floating static route .is it possible?

I 'm not agree with my book response, please can you give me your opinion.To what 3 destinations can a cisco router sends its logging process and error messages to ?A)Messag directoryB)Logging bufferC)Terminal lineD)History fileE) Configuration fileR...

Hi,My Internet speed is 4Mbps. What kind of serial interface I have to select?What is WIC-2T serial interface supported speed?RegardsSKRAO