7200VxR(config-if)#vlan-range dot1q ?<1-4094> First VLAN ID in rangeIs this VLAN Limitation on 7206 VXR???I need to have 4096!!!Some info on this would definitely be rated :)
Has anybody ever had any issues across a WAN using the Microsoft RPC Port 135. IP connectivity from source to destination and back has already been confirmed with successful pings
HiI want to Test a call from My ISDN Bri interface i have avialbe ISDN pair to chk itPhysically i have made it and now want to config it Just dial an other Isdn Number ????How I do it ????My config ... are will it Work ????nterface Dialer0 no ip ad...
We have a 2Mbit leased line between two of our sites. In the last day or two we have been experiencing thousands of frame and CRC errors on one of our serial interfaces (X21). Today our leased line providers did and end to end test of the line and fo...
Hi Experts, One problem with my cisco 2801, when I have inserted the E&M card it is not supporting on the slot. The output of show diag is as attahced. IOS is : c2801-ipbase-mz.124-1c.bin Any help would be appreciated.. Thanks, Hardik..
what is the solution of the following:-the SP is configuring an MPLS l3 VPN.-the SP assigns Virtual IP addresses for the serial interfaces between his PE routers and the CE routers- Case #1 - by chance the Vurtual IP addresses assigned to one of the ...
anyone, I want to know the address of the switch where my fastethernet port on my router is connected, what particular command on a router will I use? thanks
I have this 1721 router that won't fully boot. As soon as you turn it on it showsSystem Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)TAC Support: http://www.cisco.com/tacCopyright (c) 2001 by cisco Systems, Inc.C1700 platform with 32768 Kby...
Hi.I need that a router (1751-V) ticket the calls done by him to PSTN. However, it is not a srst and there is no call manager in the solution.Does anybody know how I make this?Thanks.
Hello, I have a hub and spoke topology. The hub site has two ISPs with two different global subnets. From the HUB I have two tunnels eached tunnel is sourced from one ISP. Therefore, one tunnel has source interface IP from ISP1 and the other tunnel ...
hi;I am having three 2mbps link connected to my HO to Datacentre,running eigrp,now I want to dedicate one of the 2 mbps link only for some Ip from HO to access some server in datacentre and vice versa. and if other ip access those server will go thro...
If all sites have their default 0.0.0.0 0.0.0.0 route pointing into the MPLS cloud via a static route and running OSPF,Can you set the "default-information originate" at the main site (which also has static route pointing into cloud) and remove the s...
Hi,I want to route two different networks on one switch (C3750) to differnet Gateway routers..xx/24 and .yy/24 two network and gateway's xx.1 and yy.1 respectivly. How i route them ???Via Vlan Interfaces,???via Interfcaes (on uplink port)???or any ot...
