Routing

Hello,We use 1760 and ADSL WIC for connection to our provider. Since few days we started having problems with download. I check DSL stats but i do not see errors (see attached). The only problem that i can see are CRC errors on int a0/0, debug atm er...

HiI have a routing problemthe esenarios are the following:I have 2 Links to internet, the first is a v.35 link with 512kbps include a IP LAN pool, and the second is a ADSL link with dynamic IP.The first link is used for a VPN L2L, Client VPN and some...

DEAR FRIENDS, HOW CAN I SOLVE THE PROBLEMFOR LATE COLLISION OUTPUT ERRORS E

Hi folks,what is exactly a NAT Virtual Interface, and when I've to use it?thanks for your supportRegardsAndrea

I have a router connected via an Ethernet port to 100 duplex Mbps/Full towards an operator limiting the band-width to 4Mbps. How can I make so that my policy-map associated with the Voip treatment is put in function as of the use of the 4Mbps?

I have several remote sites that I want to set up in the following way, I have it set up in a lab now:The primary is connected via MPLS and is using OSPF for connectivity to the HQ site. The secondary has a VPN connection to the Internet as a ...

Hii... Please refer to my doubt ..will asa5500 be possible to monitor all the web url visited from user ...and create a log of all sites visited from a specific host...please do reply .... Regards, Midhun

Hi everybody:I want to route a static nat ip address to a external client with EIGRP ? I don?t want to use static routes neither in my site nor in the client site.Can I do this with routing protocol and static route?Thank you.

Hello every one,I am using three T1 lines... frequently i m gettting error on lines ...because it is found that these lines are jumping...means getting down once in a day and this is affecting overall our company website (all online transaction...)ca...

I have 2 routers (A and B) that are connected through a Frame Relay Cloud. Is it possible that if "A" router goes down due to power issue, the PVC still shows as "PVC STATUS = ACTIVE"."PVC STATUS = ACTIVE" verifies the connectivity between the CPE an...

How I Cant to connect NM-1A Single Mode Long reach STM-1 Module Very Near Of ATM Switch. Luis

Dear all expertsI hve small dout abt Faster Convergence which is fastest convergence protocol is it OSPF or EIGRPany help pls.....