11-15-2007 08:13 AM - edited 03-03-2019 07:33 PM
In order to change the .bin file on my 2811 router can I just delete c2800nm-advsecurityk9-mz.1243h.bin and replace it with c2800nm-advanterprisek9-mz.124-6.T8.bin?
Is that allI have to do to reload it?
This is the first one I have had to reload the IOS on.
Solved! Go to Solution.
11-15-2007 08:25 AM
Yes, you can delete it with:
erase flash:/c2800nm-advsecurityk9-mz.1243h.bin
You could also keep it there in case there is a problem with new image. You would copy the file to flash and then go into config mode and type:
boot system flash:c2800nm-advanterprisek9-mz.124-6.T8.bin
This will tell the router what image to boot (otherwise it will boot the first image in flash).
HTH and please rate.
11-15-2007 08:25 AM
Yes, you can delete it with:
erase flash:/c2800nm-advsecurityk9-mz.1243h.bin
You could also keep it there in case there is a problem with new image. You would copy the file to flash and then go into config mode and type:
boot system flash:c2800nm-advanterprisek9-mz.124-6.T8.bin
This will tell the router what image to boot (otherwise it will boot the first image in flash).
HTH and please rate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide