01-15-2012 05:12 AM - edited 03-04-2019 02:54 PM
Hi
We have Nexus 7018 is on production. Recently it is been configured.
When we issue below command, we get "License missing"
This means license has not been installed? we have purchased part#N7K-LAN1K9
NX-7018-SW# show license usage
Feature Ins Lic Status Expiry Date Comments
Count
--------------------------------------------------------------------------------
LAN_ADVANCED_SERVICES_PKG No - Unused -
LAN_ENTERPRISE_SERVICES_PKG Yes - In use Never license missing
--------------------------------------------------------------------------------
**** WARNING: License file(s) missing. ****
Pls. suggest.
Solved! Go to Solution.
01-15-2012 02:34 PM
Hi,
Try copying the license file from the stand-by switch to the active switch and install it.
HTH
01-15-2012 10:40 AM
Hi,
yes, it must be installed.
Do you have a .lic file in your file system (usually in bootflash:)?
Try typing 'show license file ?' and check what you see
to install the license
install license bootflash:///.lic
and then you check again 'show license usage'
Riccardo
01-15-2012 11:58 AM
We have nexus 7018 with 2 N7K-SUP1
In standby SUP I can see .lic file, but in active there is no .lic file.
Is something wrong ? or shall I copy standby .lic file in active SUP and install?
----------------------------------------------------------------
dir bootflash://sup-standby/
273 Dec 30 11:13:23 2010 TBM14481648_151640682.lic
16384 Dec 30 11:10:58 2010 lost+found/
99566941 Jan 02 13:19:43 2012 n7000-s1-dk9.4.2.6.bin
23863296 Jan 02 13:12:53 2012 n7000-s1-kickstart.4.2.6.bin
4096 Dec 30 11:50:31 2010 vdc_2/
4096 Dec 30 11:50:31 2010 vdc_3/
4096 Dec 30 11:50:31 2010 vdc_4/
dir bootflash:
49152 Jan 15 15:42:49 2012 lost+found/
99566941 Jan 17 10:36:00 2008 n7000-s1-dk9.4.2.6.bin
23863296 Jan 17 10:35:26 2008 n7000-s1-kickstart.4.2.6.bin
4096 Jan 17 10:42:53 2008 vdc_2/
4096 Jan 17 10:42:53 2008 vdc_3/
4096 Jan 17 10:42:53 2008 vdc_4/
---------------------------------------------------------------------------
Pls. advice.
Rgds
Rajesh
01-15-2012 02:34 PM
Hi,
Try copying the license file from the stand-by switch to the active switch and install it.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide