No able to ping peer ip address

[atuldalvi]

Dear Friends,

We are having a STM1 - 155 Mbps link to our provider.

Now I am able to extended ping but not standard ping .

Atul

[Richard Gallagher]

More info is required....what parameters are you changing in the extended ping to make it work? What do the configs for each side of the link look like?

[atuldalvi]

KUIX_2#ping www.yahoo.com

Translating "www.yahoo.com"...domain server (82.145.192.66) [OK]

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 216.109.118.77, timeout is 2 seconds:

.....

Success rate is 0 percent (0/5)

KUIX_2#ping

Protocol [ip]:

Target IP address: www.yahoo.com

Repeat count [5]: 10

Datagram size [100]:

Timeout in seconds [2]:

Extended commands [n]: y

Source address or interface: 62.216.146.145

% Invalid source

Source address or interface: 62.216.146.146

Type of service [0]:

Set DF bit in IP header? [no]:

Validate reply data? [no]:

Data pattern [0xABCD]:

Loose, Strict, Record, Timestamp, Verbose[none]:

Sweep range of sizes [n]:

Type escape sequence to abort.

Sending 10, 100-byte ICMP Echos to 216.109.118.77, timeout is 2 seconds:

!!!!!!!!!!

Success rate is 100 percent (10/10), round-trip min/avg/max = 280/280/284 ms

KUIX_2#

[attrgautam]

Is it possible to show the route for yahoo.com and the config on the router if possible.