Catalyst 4507R-E

[Hafsah Ahmad]

Hi 

I am using catalyst 4507 R-E  

I did the password recovery and then when I reloaded the below info appears in the rommom mode

please help

as how can solve this problem

I have reloaded several times but its the same

 **********************************************************
 *                                                        *
 * Welcome to Rom Monitor for  WS-X4515 System.           *
 * Copyright (c) 1999-2004 by Cisco Systems, Inc.         *
 * All rights reserved.                                   *
 *                                                        *
 **********************************************************

 Rom Monitor Program Version 12.2(20r)EW1
 Supervisor: WS-X4515  Chassis: Unknown( 5 )
 Hardware Revisions - Board: 2.14 CPLD: 32 Dagobah: 226

 MAC Address  : 00-15-c6-bd-d3-54
 IP Address   : 10.10.10.10
 Netmask      : 255.255.255.0
 Gateway      : Not set.
 TftpServer   : 10.10.10.11
 Main Memory  : 512 MBytes

 ***** The system will autoboot in 5 seconds *****

 Type control-C to prevent autobooting.
 . . . . .

 ******** The system will autoboot now ********

 config-register = 0x2102
 Autobooting using BOOT variable specified file.....

 Could not find a valid file in BOOT environment variable.
 BOOT variable can be set from IOS. To find currently set
 Rom Monitor variables, please type 'set' command.

 For help on choosing a boot method,  type 'confreg' command.
rommon 1 >
rommon 1 >

[M02@rt37]

Hi,

 config-register = 0x2102:

The factory-default setting for the configuration register is 0x2102. This indicates that the router should attempt to load a Cisco IOS^® software image from Flash memory and load the startup configuration with a console speed of 9600 baud.

Then, you don't have a valide IOS or you may be missing a boot statement in the config and that could be the problem.

Check this:

https://www.cisco.com/c/en/us/support/docs/routers/4000-series-routers/15072-recovery-4500-4700.html