Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

1130 AG AP and Broadcast of the SSID

We have 3 1130's installed and 2 vlans, one public and one private. I need to broadcast my private SSID but cannot find the setting to allow this. Can someone advise me on the location of the setting?

chaz

8 REPLIES

Re: 1130 AG AP and Broadcast of the SSID

Charles,

     I assume you are using IOS (Autonomous) Access points.. if so you need to enable guest-mode on the Dot11 SSID

so it would look something like this

dot11 ssid private
    vlan x
    guest-mode

Hope this helps.. Please feel free to rate it.

Community Member

Re: 1130 AG AP and Broadcast of the SSID

Forgive my response/confusion but in using the web interface, where is this setting held?

Bronze

Re: 1130 AG AP and Broadcast of the SSID

It should be under Security -> SSID towards the bottom of the page you will need to scroll the select Guest ID and the SSID you want broadcast.

Bill

Community Member

Re: 1130 AG AP and Broadcast of the SSID

Dumb follow up, but the device cant broadcast both SSID's?

Hall of Fame Super Blue

Re: 1130 AG AP and Broadcast of the SSID

Yes, you can broadcast up to 16 SSID.

Community Member

Re: 1130 AG AP and Broadcast of the SSID

I can get one or the other to broadcast but not both. What am I doing incorrect?

Hall of Fame Super Blue

Re: 1130 AG AP and Broadcast of the SSID

Go to Security > SSID Manager.  Highlight the SSID you want and go down and tick "Set SSID as Guest Mode". 

Hall of Fame Super Blue

Re: 1130 AG AP and Broadcast of the SSID

Don't forget to rate our posts.  Thanks.

3584
Views
0
Helpful
8
Replies
CreatePlease to create content