Im trying to get some SNMP monitoring running for multiple 1130AG APs. I keep running into walls though. APS are running with the following image : c1130-k9w7-mx.124-25d.JA1.
I cant use the show environment cmd on the APs. According to the following official Cisco document, the show environment cmd is supported from image version 12.2(11) JA , but is not available on my APs running 12.4(25d)JA1:
According to the Cisco IOS MIB locator, the 1130AG AP does not support the ENVMON-MIB . That MIB is generally used for temperatur monitoring on many cisco devices. The 1130AG does however support ENTITY-MIB , but I am not entirely sure that this MIB can return temp info. There is very little/no documentation on this.
Can anyone help me out? I would very much appreciate it :)
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...