Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

1131 AP Converted from IOS to LWAPP keeps on rebooting

I use the upgrade tool from cisco and upgrade was successful into LWAPP.

I'm getting an error and AP keeps on rebooting ..

*Mar 1 00:00:39.861: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.79, mask 255.255.255.0, hostname AP0017.95b0.cd30

*Mar 1 00:00:55.143: %LWAPP-5-CHANGED: LWAPP changed state to JOIN

examining image...

*Jul 27 18:37:53.132: %LWAPP-5-CHANGED: LWAPP changed state to IMAGE

%Error opening (Protocol error)archive download: takes 6 seconds

*Jul 27 18:37:59.133: LWAPP_CLIENT_ERROR_DEBUG: Retransmission count for packet exceeded more than max(IMAGE_DATA

, 1)

*Jul 27 18:37:59.133: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY

*Jul 27 18:37:59.133: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY

*Jul 27 18:37:59.136: LWAPP_CLIENT_ERROR: not receive read response(3)

*Jul 27 18:37:59.140: lwapp_image_proc: unable to open tar file

*Jul 27 18:37:59.168: %SYS-5-RELOAD: Reload requested by lwapp image download proc. Reload Reason: Reason unspecified.

*Jul 27 18:37:59.168: %LWAPP-5-CHANGED: LWAPP changed state to DOWN

*Jul 27 18:37:59.174: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY

Any solution on these?

Thanks

  • Security and Network Management
1 REPLY

Re: 1131 AP Converted from IOS to LWAPP keeps on rebooting

Just solved the problem...

I upgraded 2006 WLC into version 3.2.116.21.

566
Views
0
Helpful
1
Replies
This widget could not be displayed.