Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

1231 AP with EAP-IAS 2003: Failure Authentication.

Hi All,

This is a little simple for those who have faced the problem but a little lengthy for those who have not come accross the same. Please grab a coffee before we begin.

Scenario: Am trying to have EAP authentication for my wireless users to be authenticated by my local Windows 2003 server using inbuild IAS Radius.

Please find the configuration below of the same.

Issue: Issue is that the authentication is failing ever time. I will give also a debug of the Radius debug for the same.

Where and what is wrong .. any one !!

Please find the config and Debug attached in this query.

Rgds.

Tauseef Ahmed

Technical Support Manager.

CAD GULF LLC. Dubai.UAE.

mail: tauseef@cadgulf.com

1 REPLY
Silver

Re: 1231 AP with EAP-IAS 2003: Failure Authentication.

When you configure "radius-server deadtime ", the gateway does not use this server for that period of time. And when that time is expired, it marks that as usuable. And for that, it does not check the connectivity to that radius server. That is why you get that message "no sg in radius-timers: ctx 0xBF2928 sg 0x0000"

166
Views
0
Helpful
1
Replies
CreatePlease to create content