Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1240AG as WDS & Local Radius Server

Have 5 1240AG's and want to use one as WDS and Local Radius Server.

Am using the following as a guide:

The above example uses a Cisco Secure ACS and designates both an AP and a WSLM as the WDS. I just want to use the AP as the WDS.

Isn't it possible to do the whole thing just using a 1240AG as both the WDS and Local Radius Server and not use a Cisco Secure ACS or WSLM?

Is there an online guide for such a thing? (looked, didn't find it)

Appreciate the guidance



Re: 1240AG as WDS & Local Radius Server

Sure, just make sure you use port 1812 for your radius auths. Here's an example of setting up the local Radius server:

And here's the guide for setting up WDS:

New Member

Re: 1240AG as WDS & Local Radius Server

Thanks, that's what I thought.

I had found the WDS setup link but wasn't sure if I was missing something.

The link you provided for the Local Radius Server setup is for "partners" only I believe? Can't access it.

But I think I should be able to find some guides/examples somewhere else in the archives. I'm starting w/ these 2 links;


Appreciated the heads up about port 1812.

CreatePlease login to create content