Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4402 Controller and Microsoft IAS

We recently installed a WLC 4402 and upgraded all of our standalone AP's to LWAPP's. Each of the previous AP's had an entry in IAS Radius. Can these be safely removed from IAS now? As far as I can see from the IAS logs, all authentication requests are received from the WLC only.

If I can remove them, it will allow me to add other Cisco devices to IAS since Microsoft sets a 50 client limit.

I have not been able to find a definitive answer to this in the documentation.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: 4402 Controller and Microsoft IAS

I don't have any link to this, but yes, you can remove the individual APs from your Radius server.

The authentication is now handled by the WLC and IAS Radius.

HTH

Steve

2 REPLIES
Silver

Re: 4402 Controller and Microsoft IAS

I don't have any link to this, but yes, you can remove the individual APs from your Radius server.

The authentication is now handled by the WLC and IAS Radius.

HTH

Steve

New Member

Re: 4402 Controller and Microsoft IAS

I thought so but wanted to make sure before I started deleting them.

Thanks for the reply Steve!

260
Views
0
Helpful
2
Replies
CreatePlease login to create content