Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4404, ACS and NOVELL

How do I get the ACS server to work with Novell to querry for users/passwords? I was told by a cisco engineer that ACS would be able to querry our NDS tree for accounts. I see the radius and ldap but cannot figure out how to exactly get it to work.(LDAP does work on NDS have tested and its working good) Nor have I quite figured out how my 4400 is supposed to pass security info to my wireless clients as a tac engineer said it would do from ACS.

Whats the best way to securely manage this so my wireless clients are very secure?


Re: 4404, ACS and NOVELL

on the controller, under security, AAA, RADIUS Authentication. Add an entry for your ACS server. then under the WLAN, that you want to associate to the ACS, pull down the server 1 so that it is showing the server you added. From that point, the WLAN will send request to the ACS for login information.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
CreatePlease to create content