5508 Series Controller, LAP1041 model, SG300-28P switch
I have a job to construct a WLAN with those three set of products (5508 Series Controller, LAP1041 AP devices, SG300-28P switch). There will be <25 AP in the scheme. Do you have some technical suggestions for me, regarding the physical connections, connection protocols, security settings... I have the rough picture about deployment in my head, but this will be the first time for me to deal with any Wireless products, so I'm a bit nervous. Any suggestions would be more than welcome. Thank you very much in advance!
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...