Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

5760 Webauth Cert "How-To"

Does anybody knows how to do this.

On 5508, certificates for the virtual ip can be configured and virtual ip can be binded to the url of the certificate imported on the wlc., but i a cannot find any guide to do this on a 5760

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

HiSee whether below helps on

Hi

See whether below helps on this

5760(config-params-parameter-map)#virtual-ip ipv4 1.1.1.1 virtual-host ?
  WORD  Specify name of the virtual host

 

What version of IOS XE are you running ? 3.6E is the latest.

HTH

Rasika

****Pls rate all useful responses ****

 

5 REPLIES
Bronze

Please refer: http://www

Please refer: http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan-controllers/117728-configure-wlc-00.html#anc9

Hope that helps.

New Member

Thanks for your answers, but

Thanks for your answers, but i already did both things. Wahta i wanto to to is to vinculate the dns resolution of the certificate with vIP. I attached an image from the GUI menu to do this on 5508, i cannot do this on 5760.
VIP Purple

HiSee whether below helps on

Hi

See whether below helps on this

5760(config-params-parameter-map)#virtual-ip ipv4 1.1.1.1 virtual-host ?
  WORD  Specify name of the virtual host

 

What version of IOS XE are you running ? 3.6E is the latest.

HTH

Rasika

****Pls rate all useful responses ****

 

New Member

Great, that's it. Thanks a

Great, that's it.

 

Thanks a lot

VIP Purple

Hi You configure virtual IP

Hi 

You configure virtual IP under "global parameter map" on your 5760. When you get the CSR, you have to use the FQDN of this virtual IP address.

eg

parameter-map type webauth global
 type webauth
 virtual-ip ipv4 1.1.1.1
!

Here is how do you install a WebAuth cert on 5760

http://mrncciew.com/2014/07/30/5760-webauth-certificates/

 

HTH

Rasika

**** Pls rate all useful responses ****

100
Views
0
Helpful
5
Replies
CreatePlease to create content