Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

802.1X and per user vlan

hi all,

I would like to know if i can assign one user in a vlan with 802.1X in a wireless environment ?

if yes,Do i need a particular radius server or is this feature "basic" on ias,acs,meetinghouse funk..

Can i have a vlan authentication policy (i.e vlan 2 no authen, vlan 3 eap-md5 )

Can i authenticate user1 on domain1 and user2 on domain2 on the same AP with a radius ias,acs or other?.

Thanks

1 REPLY
New Member

Re: 802.1X and per user vlan

I take a stab at some of this...

I have per user VLANS setup on my 1220 AP's and am using 2003 server IAS for the radius server. I also had it working on 2000 server.

I have one VLAN with no authentication and others for my users that do authenticate. They are authenticating using MS PEAP and UN/PW combo.

Here is a link on VLANS for the VXWORKS series of AP's

http://www.cisco.com/en/US/customer/products/hw/wireless/ps430/products_configuration_guide_chapter09186a00800e02cb.html

This one is for IOS (looks new I haven't read it yet..)

http://www.cisco.com/en/US/customer/products/hw/wireless/ps4570/products_configuration_example09186a00801d0815.shtml

Finally another link -

http://www.cisco.com/en/US/customer/products/hw/wireless/ps430/prod_technical_reference09186a00801444a1.html

I am not sure about the different user/domain combos since I only have one domain here. There are also some good posts in this forum, do a search for per user vlan, etc.

Good Luck.

Don

185
Views
0
Helpful
1
Replies
CreatePlease to create content