AAA/RADIUS server priority in WLC

[Philip Vilhelmsson]

Hi,

As of now I have our RADIUS server defined in both the WLAN and Flexconnect group. Do I need to define it in both? Which one is primarily used for authentication of users?

Regards,

Philip

[Rasika Nayanajith]

Hi Phillip,

When you configure AAA server under WLAN -> Security ->AAA server section that will take the precedance over any other configured AAA servr in the controller.

Typically you configure primary & secondary AAA server for FlexConnect AP group, to make it administratively easy to configurer it for multiple H-REAP/FlexConnect APs (simply you can add AP to the group which will get those radius config). You requires this if you have multiple AAA servers & in H-REAP standalone mode you require to use them.

This is some reference post with respect to WLC 7.0. code which may help you on this

http://mrncciew.com/2013/03/12/h-reap-with-radius/

HTH

Rasika

**** Pls rate all useful responses ****

[Saravanan Lakshmanan]

Answere is here

http://www.revolutionwifi.net/2011/09/cisco-h-reap-local-authentication.html