Access point is not associating with Cisco 3850 switches
I configured Cisco 3850 switch with 2 vlans. One is default vlan1 and assigned it as managemet vlan another one is vlan 101. However I trying to put the access point in vlan 101 and trying to associate with Cisco 3850, it is giving me the following error. Kindly let me know do I need to put the access point in the management VLan itself to join with inbuilt Cisco 3850 switch controller. Also i am trying to join the access point from the remote location to this 3850 switch controller, but it is not getting associated.
Apr 13 12:07:54.346: *spamApTask1: 1 wcm: %CAPWAP-3-DISC_WIRELESS_INTERFACE_ER R1: Unable to process discovery request from AP 1c1d.869e.ff20 , VLAN (101) scrI p (10.10.10.4) dstIp(255.255.255.255), could not get wireless interface belongin g to this network
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...