Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ACS 5.2 Authentication

Hi All

Does anyone know if there is a way to authenticate users using the SSID?

I was led to believe that you could use RADIUS IETF attribute 30 (Calling Station ID) but I'm not convinced this will work.

Thanks

Regards

Roger

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: ACS 5.2 Authentication

Yes it is required. It's a wildcard for the Mac address.

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
7 REPLIES
Hall of Fame Super Silver

Re: ACS 5.2 Authentication

You can define the SSID. It's in the end user station area. Here is a link... Better than me trying to remember:)

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807669af.shtml

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
New Member

ACS 5.2 Authentication

Hi Scott

I've seen this document - its very old using an old version of WLC code and the old ACS (probably version 4).

I need something that relates to ACS 5.2

Hall of Fame Super Silver

Re: ACS 5.2 Authentication

It's the same. You need to define the end station filter using *SSID

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: ACS 5.2 Authentication

You need to define this:

  • DNIS—*ssidname

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
New Member

ACS 5.2 Authentication

Hi Scott

is the * crucial?

I've created an endpoint filter with DNIS matching the SSID name but I haven't used the *.

It's not working yet - hence the question.

Roger

Hall of Fame Super Silver

Re: ACS 5.2 Authentication

Yes it is required. It's a wildcard for the Mac address.

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
New Member

ACS 5.2 Authentication

Thanks Scott - the wildcard did the trick.

493
Views
0
Helpful
7
Replies
CreatePlease to create content