Well you have to be more specific with your policies. For example, identity would be one of the following: AD user, internal ACS accounts, etc. for the EAP authentication method, you basically allow only those protocols. If you have one SSID using EAP-Fast and another using LEAP, then you would need to create two Network Access Policies. I really still don't know what your design is and that is why I'm throwing out some examples. The ACS Configuration Guide is a good reference.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...