ACS only allow 7921G phones on a certain SSID - block others
Hello, we have just deployed an SSID of hVoIP and applied CAC and QoS. It works well. We have a "data" SSID of DATA.
Is there a way to only allow the Cisco wireless phones to authnticate to this SSID and block, say laptops or other WiFi phones, from authenticating. We don't want people to connect their laptops to this network to get their data prioritized and ruin the network for the calls.
Re: ACS only allow 7921G phones on a certain SSID - block others
Couple of ways you can do this...
First, just have one SSID, and assign users to VLANs and give them ACL / QoS / CoS settings dynamically. This can be done in ACS using the airespace attributes, and enabling "Allow AAA Override" on the WLAN in the WLC.
Second, in your ACS Groups, you can specify which SSIDs a user is allowed to come from, this is done (from memory) using the NDIS settings. With this method, you go to the groups that your data users come from, and specify that they can only connect from the "data" ssid, and same again for the phones.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...