Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AeroScout Engine Not Loading

Hello,

We have an MSE 3350 with the AeroScout Engine for Tag Tracking.  I've performed the steps listed in this thread: https://supportforums.cisco.com/message/3058630.

However when moving the server-eng.db file, the Context Aware service will not track any elements, and our WCS will not reach the MSE, but the AeroScout Engine turns to "active:true"

Please adivse on how we can proceed.

Everyone's tags (5)
7 REPLIES

Re: AeroScout Engine Not Loading

post the "getserverinfo" from the mse cli and get the MSE logs and all the logs under /opt/mse/logs in zip format.

New Member

Re: AeroScout Engine Not Loading

Hi Nael,

Attached are the log files and below is the getserverinfo output:

~]# getserverinfo
MSE Platform is up, getting the status

-------------
Server Config
-------------

Product name: Cisco Mobility Service Engine
Version: 7.0.105.0
Hw Version: V01
Hw Product Identifier: AIR-MSE-3350-K9
Hw Serial Number: MXQ03108G4
Use HTTP: false
Legacy HTTPS: true
Legacy Port: 8001
Log Modules: 520617983
Log Level: INFO
Days to keep events: 2
Session timeout in mins: 30
DB backup in days: 2

-------------
Services
-------------

Service Name: Context Aware Service
Service Version: 7.0.105.0
Admin Status: Enabled
Operation Status: Up

Service Name: Wireless Intrusion Protection Service
Service Version: 1.0.2066.0
Admin Status: Enabled
Operation Status: Up

--------------
Server Monitor
--------------


Server start time: Thu Oct 07 16:15:34 EDT 2010
Server current time: Sat Oct 09 09:02:00 EDT 2010
Server timezone: America/New_York
Server timezone offset: -18000000
Restarts: 16
Used Memory (bytes): 628499400
Allocated Memory (bytes): 1477902336
Max Memory (bytes): 1477902336
DB virtual memory (kbytes): 27026
DB virtual memory limit (bytes): 0
DB disk memory (bytes): 6656032768
DB free size (kbytes): 738584

---------------
Active Sessions
---------------

Session ID: 14621
Session User ID: 3
Session IP Address: 10.10.205.21
Session start time: Thu Oct 07 16:16:28 EDT 2010
Session last access time: Sat Oct 09 09:00:49 EDT 2010

-------------
Context Aware Service
-------------

Total Active Elements(Clients, Rogues, Interferers): 1032
Active Clients: 712
Active Tags: 0
Active Rogues: 320
Active Interferers: 0
Active Wired Clients: 0
Active Elements(Clients, Rogues, Interferers) Limit: 3000
Active Tag Limit: 100
Active Wired Clients Limit: 0
Active Sessions: 1
Clients Not Tracked due to the limiting: 0
Tags Not Tracked due to the limiting: 0
Rogues Not Tracked due to the limiting: 0
Interferers Not Tracked due to the limiting: 0
Wired Clients Not Tracked due to the limiting: 0
Total Elements(Clients, Rogues, Interferers) Not Tracked due to the limiting: 0

-------------
Context Aware Sub Services
-------------

Sub Service Name: aeroscout
Version: 3.2.0 - 4.0.14.14
Description: AeroScout® Location Engine for RSSI and TDOA asset tracking
Registered: true
Active: false
Engine flap Count: 0
Failed Connection attempts: 369

Re: AeroScout Engine Not Loading

What version of WCS ?

New Member

Re: AeroScout Engine Not Loading

WCS Version is 7.0.164.0

New Member

Re: AeroScout Engine Not Loading

Hello,

The issues persist, the failed connection attempts have increased.  Here is the latest getserverinfo:

# getserverinfo
MSE Platform is up, getting the status

-------------
Server Config
-------------

Product name: Cisco Mobility Service Engine
Version: 7.0.105.0
Hw Version: V01
Hw Product Identifier: AIR-MSE-3350-K9
Hw Serial Number: MXQ03108G4
Use HTTP: false
Legacy HTTPS: true
Legacy Port: 8001
Log Modules: 520617983
Log Level: INFO
Days to keep events: 2
Session timeout in mins: 30
DB backup in days: 2

-------------
Services
-------------

Service Name: Context Aware Service
Service Version: 7.0.105.0
Admin Status: Enabled
Operation Status: Up

Service Name: Wireless Intrusion Protection Service
Service Version: 1.0.2066.0
Admin Status: Enabled
Operation Status: Up

--------------
Server Monitor
--------------


Server start time: Thu Oct 07 16:15:34 EDT 2010
Server current time: Wed Oct 20 09:06:35 EDT 2010
Server timezone: America/New_York
Server timezone offset: -18000000
Restarts: 16
Used Memory (bytes): 890585880
Allocated Memory (bytes): 1451425792
Max Memory (bytes): 1451425792
DB virtual memory (kbytes): 30250
DB virtual memory limit (bytes): 0
DB disk memory (bytes): 7127072768
DB free size (kbytes): 366912

---------------
Active Sessions
---------------

Session ID: 14621
Session User ID: 3
Session IP Address: 10.10.205.21
Session start time: Thu Oct 07 16:16:28 EDT 2010
Session last access time: Wed Oct 20 09:03:23 EDT 2010

-------------
Context Aware Service
-------------

Total Active Elements(Clients, Rogues, Interferers): 2840
Active Clients: 2495
Active Tags: 0
Active Rogues: 345
Active Interferers: 0
Active Wired Clients: 0
Active Elements(Clients, Rogues, Interferers) Limit: 3000
Active Tag Limit: 100
Active Wired Clients Limit: 0
Active Sessions: 1
Clients Not Tracked due to the limiting: 0
Tags Not Tracked due to the limiting: 0
Rogues Not Tracked due to the limiting: 0
Interferers Not Tracked due to the limiting: 0
Wired Clients Not Tracked due to the limiting: 0
Total Elements(Clients, Rogues, Interferers) Not Tracked due to the limiting: 0

-------------
Context Aware Sub Services
-------------

Sub Service Name: aeroscout
Version: 3.2.0 - 4.0.14.14
Description: AeroScout® Location Engine for RSSI and TDOA asset tracking
Registered: true
Active: false
Engine flap Count: 173
Failed Connection attempts: 4088

Re: AeroScout Engine Not Loading

Hi.

First of all; review the Aeroscout compatibility; you are using an older version of Aeroscout Engine:

For MSE 7.0.105.0 you may use the Aeroscout engine 4.2.3.5 which is the only version Aeroscout have certified; refer to the AeroScout Version Compatibility With Cisco MSE (article 1100 from Aeroscout)

Then, you have to license the Engine using the Aeroscout System Manager when the engine will be up and active.

Good luck 

Best Regards.

New Member

Re: AeroScout Engine Not Loading

Hello,


I have got the same problem !

./msed status
STATUS:
MSE Platform is up, getting the status

-------------
Server Config
-------------

Product name: Cisco Mobility Service Engine
Version: 7.0.105.0
Hw Version: V01
Hw Product Identifier: AIR-MSE-3350-K9
Hw Serial Number: MXQ034020V
Use HTTP: false
Legacy HTTPS: false
Legacy Port: 8001
Log Modules: 24516
Log Level: INFO
Days to keep events: 7
Session timeout in mins: 30
DB backup in days: 7


-------------
Services
-------------


Service Name: Context Aware Service
Service Version: 7.0.105.0
Admin Status: Enabled
Operation Status: Up


Service Name: Wireless Intrusion Protection Service
Service Version: 1.0.2066.0
Admin Status: Enabled
Operation Status: Up


--------------
Server Monitor
--------------

Server start time: Thu Jan 06 21:36:29 CET 2011
Server current time: Thu Jan 06 22:19:32 CET 2011
Server timezone: Europe/Amsterdam
Server timezone offset: 3600000
Restarts: 11
Used Memory (bytes): 109683888
Allocated Memory (bytes): 512163840
Max Memory (bytes): 2863333376
DB virtual memory (kbytes): 16364
DB virtual memory limit (bytes): 0
DB disk memory (bytes): 974880768
DB free size (kbytes): 144072


---------------
Active Sessions
---------------


Session ID: 6185
Session User ID: 2
Session IP Address: x.x.x.x
Session start time: Thu Jan 06 21:39:38 CET 2011
Session last access time: Thu Jan 06 22:17:26 CET 2011


-------------
Context Aware Service
-------------


Total Active Elements(Clients, Rogues, Interferers): 3839
Active Clients: 2445
Active Tags: 0
Active Rogues: 1394
Active Interferers: 0
Active Wired Clients: 0
Active Elements(Clients, Rogues, Interferers) Limit: 12005
Active Tag Limit: 100
Active Wired Clients Limit: 0
Active Sessions: 1
Clients Not Tracked due to the limiting: 0
Tags Not Tracked due to the limiting: 0
Rogues Not Tracked due to the limiting: 0
Interferers Not Tracked due to the limiting: 0
Wired Clients Not Tracked due to the limiting: 0
Total Elements(Clients, Rogues, Interferers) Not Tracked due to the limiting: 0


-------------
Context Aware Sub Services
-------------


Sub Service Name: aeroscout
Version: 3.2.0 - 4.0.14.14
Description: AeroScout® Location Engine for RSSI and TDOA asset tracking
Registered: true
Active: false
Engine flap Count: 0
Failed Connection attempts: 19


I have installed the latest 'CISCO-MSE-L-K9-7-0-105-0-64bit.bin.gz' with Release Date: 06/JUN/2010.

I Tried :

1. ./msed stop.

2. mv /opt/mse/db/linux/server-eng.db /opt/mse/db/linux/server-eng.db.old

:  ,mv: cannot stat `/opt/mse/db/linux/server-eng.db': No such file or directory>>> !!!

# pwd
/opt/mse
# ls -al
total 1848
drwxrwxr-x 13 root root    4096 Dec  3 18:51 .
drwxr-xr-x  4 root root    4096 Dec  3 18:45 ..
-rw-------  1 root root       0 Jan  6 21:36 0
drwxrwxr-x  2 root root    4096 Dec  3 18:45 attach
-rw-rw-r--  1 root root 1828881 Dec  3 18:48 Cisco_Mobility_Services_Engine_InstallLog.log
drwxrwxr-x  4 root root    4096 Dec  3 18:59 dataFiles
drwxrwxr-x  8 root root    4096 Dec  3 18:45 framework
drwxrwxr-x  4 root root    4096 Dec  3 18:46 hs
drwxr-xr-x  6 root root    4096 Nov 15  2006 jre
lrwxrwxrwx  1 root root      38 Dec  3 18:48 licensing -> /opt/mse/dataFiles/framework/licensing
drwxrwxr-x 13 root root    4096 Dec  3 19:00 locserver
drwxr-xr-x  7 root root    4096 Dec  3 18:45 logs
drwxrwxr-x  2 root root    4096 Dec  3 18:45 rpms
drwxrwxr-x  3 root root    4096 Dec  3 18:45 setup
drwxrwxr-x  2 root root    4096 Dec  3 18:48 uninstall
drwxrwxr-x 14 root root    4096 Dec  3 18:52 wips

There is no directory 'db' ........


3. start msd again : ./msed start

Can you help me ?>


Thanks !

2417
Views
0
Helpful
7
Replies