Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

after autonomous AP upgrade to LWAPP it keeps reboot

My autonomous AP1231 is running software version 12.3(7), then i upgrade it with c1200-rcvk9w8-tar.123-7JX.tar and c1200-rcvk9w8-tar.123-11JX1.tar, after that, both version will make my AP keep reboot for around every 20 secs with the following error msg

Mar 1 00:00:24.401: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY

*Mar 1 00:00:25.418: LWAPP_CLIENT_ERROR_DEBUG: lwapp_crypto_init_ssc_keys_and_c

erts no certs in the SSC Private File

*Mar 1 00:00:25.419: LWAPP_CLIENT_ERROR_DEBUG:

*Mar 1 00:00:25.419: lwapp_crypto_init: PKI_StartSession failed

*Mar 1 00:00:25.419: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Re

ason: FAILED CRYPTO INIT.

*Mar 1 00:00:25.420: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file s

ystem is available.

Any way to solve it?

Thank you

1 REPLY
Hall of Fame Super Silver

Re: after autonomous AP upgrade to LWAPP it keeps reboot

When you used the upgrade tool to convert the 1231 to lwapp, did you add the ssc to the wlc? If not, then your ap will never join and will keep rebooting.

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00806a426c.shtml

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml

-Scott
*** Please rate helpful posts ***
376
Views
0
Helpful
1
Replies