cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2454
Views
29
Helpful
17
Replies

AIR-CAP1602I-E-K9 Not Talking to WLC 5508

johnlloyd_13
Level 9
Level 9

hi all,

can't seem to get my APs to talk to WLC 5508.

can someone advise which WLC firmware to use and where can i get/download (link pls).

currently WLC is running 6.0.199.4.

Mar  1 00:00:47.839: %CDP_PD-4-POWER_OK: All radios disabled - NEGOTIATED inlin

e power source

*Mar  1 00:00:53.931: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:00:55.963: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP addre

ss 172.28.159.15, mask 255.255.255.192, hostname APfc99.47a3.4d22

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Mar  1 00:01:06.899: %CAPWAP-3-ERRORLOG: Did not get log server settings from D

HCP.

*Mar  1 00:01:15.899: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL

LER

*Mar  1 00:01:15.899: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_f8

:72:64'running version 6.0.199.4 is rejected.    <<<<

----

APfc99.47a3.4d22>sh ve

Cisco IOS Software, C1600 Software (AP1G2-RCVK9W8-M), Version 15.2(2)JB, RELEASE

SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Tue 11-Dec-12 04:52 by prod_rel_team

ROM: Bootstrap program is C1600 boot loader

BOOTLDR: C1600 Boot Loader (AP1G2-BOOT-M) LoaderVersion 15.2(2)JAX, RELEASE SOFT

WARE (fc1)

APfc99.47a3.4d22 uptime is 11 minutes

System returned to ROM by power-on

System image file is "flash:/ap1g2-rcvk9w8-mx/ap1g2-rcvk9w8-mx"

Last reload reason:

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco AIR-CAP1602I-E-K9    (PowerPC) processor (revision B0) with 98294K/32768K

bytes of memory.

Processor board ID FGL1726W6DQ

PowerPC CPU at 533Mhz, revision number 0x2151

Last reset from power-on

LWAPP image version 7.4.1.37

1 Gigabit Ethernet interface

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: FC:99:47:A3:4D:22

Part Number                          : 73-14671-04

PCA Assembly Number                  : 000-00000-00

PCA Revision Number                  :

PCB Serial Number                    : FOC17182J4J

Top Assembly Part Number             : 800-38552-01

Top Assembly Serial Number           : FGL1726W6DQ

Top Revision Number                  : A0

Product/Model Number                 : AIR-CAP1602I-E-K9

Configuration register is 0xF

1 Accepted Solution

Accepted Solutions

Sandeep Choudhary
VIP Alumni
VIP Alumni

HI John,


*Mar  1 00:01:15.899: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_f8

:72:64'running version 6.0.199.4 is rejected.    <<<<

You have WLC version 6.0.199.4.

CAP 1602I AP minimum requirement is to have 7.4.100.0 version on WLC.

So you must upgarde the WLC version to atleast 7.4.100.0 then only AP can join to your WLC.

Here is the compatibilty matrix:

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

Regards

Dont forget to rate helpful posts

View solution in original post

17 Replies 17

Sandeep Choudhary
VIP Alumni
VIP Alumni

HI John,


*Mar  1 00:01:15.899: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'Cisco_f8

:72:64'running version 6.0.199.4 is rejected.    <<<<

You have WLC version 6.0.199.4.

CAP 1602I AP minimum requirement is to have 7.4.100.0 version on WLC.

So you must upgarde the WLC version to atleast 7.4.100.0 then only AP can join to your WLC.

Here is the compatibilty matrix:

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

Regards

Dont forget to rate helpful posts

Thanks for the link! Didn't see that when I was searching earlier. Will keep this with me.

We managed to upgrade 6.0 > 7.0 > 7.4 and works like a charm. Still getting my feet wet with wireless. Awesome stuff!


Sent from Cisco Technical Support iPhone App

Hi!

I have the same problem, upgrade the WLC but now does not recognize the license and not support any APs

I must do?

Juan luis

Sent from Cisco Technical Support iPad App

Paste the output from wlc: sh sysinfo

From AP: sh version      

also paste the log from AP ?

Regards

(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.

Product Name..................................... Cisco Controller

Product Version.................................. 7.6.100.0

Bootloader Version............................... 1.0.1

Field Recovery Image Version..................... 6.0.182.0

Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2

Build Type....................................... DATA + WPS

System Name...................................... WLC-CAMP

System Location..................................

System Contact...................................

System ObjectID.................................. 1.3.6.1.4.1.9.1.1069

Redundancy Mode.................................. Disabled

IP Address....................................... 10.2.3.230

Last Reset....................................... Software reset

System Up Time................................... 3 days 23 hrs 38 mins 23 secs

System Timezone Location.........................

System Stats Realtime Interval................... 5

System Stats Normal Interval..................... 180

Configured Country............................... US  - United States

Operating Environment............................ Commercial (0 to 40 C)

--More-- or (q)uit

Internal Temp Alarm Limits....................... 0 to 65 C

Internal Temperature............................. +39 C

External Temperature............................. +22 C

Fan Status....................................... OK

State of 802.11b Network......................... Enabled

State of 802.11a Network......................... Enabled

Number of WLANs.................................. 1

Number of Active Clients......................... 0

Burned-in MAC Address............................ 6C:41:6A:5F:95:20

Power Supply 1................................... Present, OK

Power Supply 2................................... Absent

Maximum number of APs supported.................. 0

(Cisco Controller) >

I sent the initialization of AP:

IOS Bootloader - Starting system.

FLASH CHIP: Micronix MX25L256_35F

Xmodem file system is available.

flashfs[0]: 5 files, 2 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 31936000

flashfs[0]: Bytes used: 6551040

flashfs[0]: Bytes available: 25384960

flashfs[0]: flashfs fsck took 9 seconds.

Reading cookie from SEEPROM

Base Ethernet MAC address: 4c:00:82:9a:47:a3

************* loopback_mode = 0

Loading "flash:/ap1g2-rcvk9w8-mx/ap1g2-rcvk9w8-mx"...####################

File "flash:/ap1g2-rcvk9w8-mx/ap1g2-rcvk9w8-mx" uncompressed and installed, entr

y point: 0x100000

executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706

Cisco IOS Software, C1600 Software (AP1G2-RCVK9W8-M), Version 15.2(2)JB, RELEASE

SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Tue 11-Dec-12 04:52 by prod_rel_team

Initializing flashfs...

FLASH CHIP: Micronix MX25L256_35F

flashfs[2]: 5 files, 2 directories

flashfs[2]: 0 orphaned files, 0 orphaned directories

flashfs[2]: Total bytes: 31808000

flashfs[2]: Bytes used: 6551040

flashfs[2]: Bytes available: 25256960

flashfs[2]: flashfs fsck took 9 seconds.

flashfs[2]: Initialization complete.

flashfs[3]: 0 files, 1 directories

flashfs[3]: 0 orphaned files, 0 orphaned directories

flashfs[3]: Total bytes: 11999232

flashfs[3]: Bytes used: 1024

flashfs[3]: Bytes available: 11998208

flashfs[3]: flashfs fsck took 1 seconds.

flashfs[3]: Initialization complete....done Initializing flashfs.

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

memory validate-checksum 30

^

% Invalid input detected at '^' marker.

no ip http server

       ^

% Invalid input detected at '^' marker.

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

login authentication default

  ^

% Invalid input detected at '^' marker.

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Warning:  the compile-time code checksum does not appear to be present.

cisco AIR-CAP1602I-N-K9    (PowerPC) processor (revision B0) with 98294K/32768K

bytes of memory.

Processor board ID FGL1730S57A

PowerPC CPU at 533Mhz, revision number 0x2151

Last reset from power-on

LWAPP image version 7.4.1.37

1 Gigabit Ethernet interface

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 4C:00:82:9A:47:A3

Part Number                          : 73-14671-04

PCA Assembly Number                  : 000-00000-00

PCA Revision Number                  :

PCB Serial Number                    : FOC17284HL9

Top Assembly Part Number             : 800-38552-01

Top Assembly Serial Number           : FGL1730S57A

Top Revision Number                  : A0

Product/Model Number                 : AIR-CAP1602I-N-K9

% Please define a domain-name first.

logging facility kern

        ^

% Invalid input detected at '^' marker.

logging trap emergencies

        ^

% Invalid input detected at '^' marker.

Press RETURN to get started!

*Mar  1 00:00:12.451: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. In

itialising Cfg

*Mar  1 00:00:13.683: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state

to up

*Mar  1 00:00:14.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth

ernet0, changed state to up

*Mar  1 00:00:15.123: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C1600 Software (AP1G2-RCVK9W8-M), Version 15.2(2)JB, RELEASE

SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Tue 11-Dec-12 04:52 by prod_rel_team

*Mar  1 00:00:15.151: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. In

itialising Cfg

*Mar  1 00:00:15.151: %CAPWAP-3-ERRORLOG: Failed to load configuration from flas

h. Resetting to default config

*Mar  1 00:00:16.195: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan

ged state to uplwapp_crypto_init: MIC Present and Parsed Successfully

no bridge-group 1 source-learning

                   ^

% Invalid input detected at '^' marker.

%Default route without gateway, if not a point-to-point interface, may impact pe

rformance

*Mar  1 00:00:46.971: %CDP_PD-4-POWER_OK: All radios disabled - INJECTOR_CONFIGU

RED_ON_SOURCE inline power source

*Mar  1 00:00:51.999: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP addre

ss 10.2.3.100, mask 255.255.255.0, hostname AP4c00.829a.47a3

Translating "CISCO-CAPWAP-CONTROLLER.campeche.ecosur.mx"...domain server (10.2.3

.10) [OK]

*Mar  1 00:01:02.971: %CAPWAP-3-ERRORLOG: Did not get log server settings from D

HCP.

HI Juan,

Juan Luis Montes Ruiz wrote:

(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.

Product Name..................................... Cisco Controller

Product Version.................................. 7.6.100.0

Bootloader Version............................... 1.0.1

Field Recovery Image Version..................... 6.0.182.0

Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2

Build Type....................................... DATA + WPS

System Name...................................... WLC-CAMP

System Location..................................

System Contact...................................

System ObjectID.................................. 1.3.6.1.4.1.9.1.1069

Redundancy Mode.................................. Disabled

IP Address....................................... 10.2.3.230

Last Reset....................................... Software reset

System Up Time................................... 3 days 23 hrs 38 mins 23 secs

System Timezone Location.........................

System Stats Realtime Interval................... 5

System Stats Normal Interval..................... 180

Configured Country............................... US  - United States

Operating Environment............................ Commercial (0 to 40 C)

I sent the initialization of AP:

Warning:  the compile-time code checksum does not appear to be present.

cisco AIR-CAP1602I-N-K9    (PowerPC) processor (revision B0) with 98294K/32768K

bytes of memory.

Processor board ID FGL1730S57A

PowerPC CPU at 533Mhz, revision number 0x2151

Last reset from power-on

LWAPP image version 7.4.1.37

1 Gigabit Ethernet interface

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 4C:00:82:9A:47:A3

Part Number                          : 73-14671-04

PCA Assembly Number                  : 000-00000-00

PCA Revision Number                  :

PCB Serial Number                    : FOC17284HL9

Top Assembly Part Number             : 800-38552-01

Top Assembly Serial Number           : FGL1730S57A

Top Revision Number                  : A0

Product/Model Number                 : AIR-CAP1602I-N-K9

% Please define a domain-name first.

logging facility kern

You have country set US on WLC.

And Your AP country regulation shows as -N-.

For US you must have -A- regulaterd domain on AP.

Whcih country you are in ???

Regards

Dont forget to rate helpful posts

I am in Mexico

HI Juan,

Change the country code on WLC.

GUI:

Disable both Network first

Choose Wireless > 802.11a/n > Network, Unselect the 802.11a Network Status check box.,Click Apply

Choose Wireless > 802.11b/g/n > Network.,Unselect the 802.11b/g Network Status check box.,Click Apply

Wireless > Country and there you can change the county.

After changing the Country you must enable both networks again.

CLI:

Change the country code of a WLC, you must disable the 802.11a and 802.11b network :

>config 802.11a disable network

>config 802.11b disable network

Now you can change the country code of the controller. For example, we change it from US to Mexico

>config country MX (Mexico)

After changing the country,enable the 802.11 interfaces.

>config 802.11a enable network

>config 802.11b enable network

Regards

Thank you, this change resolved the problem of the WLC licenses.

However, even the WLC not recognize the APs, I hit the error here:

Press RETURN to get started!

*Mar  1 00:00:12.451: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. In

itialising Cfg

*Mar  1 00:00:13.683: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state

to up

*Mar  1 00:00:14.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth

ernet0, changed state to up

*Mar  1 00:00:15.123: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C1600 Software (AP1G2-RCVK9W8-M), Version 15.2(2)JB, RELEASE

SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Tue 11-Dec-12 04:52 by prod_rel_team

*Mar  1 00:00:15.151: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. In

itialising Cfg

*Mar  1 00:00:15.151: %CAPWAP-3-ERRORLOG: Failed to load configuration from flas

h. Resetting to default config

*Mar  1 00:00:16.195: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan

ged state to uplwapp_crypto_init: MIC Present and Parsed Successfully

no bridge-group 1 source-learning

                   ^

% Invalid input detected at '^' marker.

%Default route without gateway, if not a point-to-point interface, may impact pe

rformance

*Mar  1 00:00:46.391: %CDP_PD-4-POWER_OK: All radios disabled - INJECTOR_CONFIGU

RED_ON_SOURCE inline power source

*Mar  1 00:00:48.927: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP addre

ss 10.2.3.100, mask 255.255.255.0, hostname AP4c00.829a.47a3

Translating "CISCO-CAPWAP-CONTROLLER.campeche.ecosur.mx"...domain server (10.2.3

.10) [OK]

*Mar  1 00:00:59.875: %CAPWAP-3-ERRORLOG: Did not get log server settings from D

HCP.

*Mar  1 00:01:09.875: %CAPWAP-3-ERRORLOG: Go join a capwap controller

*Jan 28 16:01:06.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i

p: 10.2.3.230 peer_port: 5246

*Jan 28 16:01:06.531: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully

peer_ip: 10.2.3.230 peer_port: 5246

*Jan 28 16:01:06.531: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.3.230

*Jan 28 16:01:06.535: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination

.

*Jan 28 16:01:06.535: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m

essage type 10 state 5.

*Jan 28 16:01:06.535: %CAPWAP-3-ERRORLOG: Failed to handle capwap control messag

e from controller

*Jan 28 16:01:06.535: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap pac

ket from 10.2.3.230

*Jan 28 16:01:11.531: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.3.230

logging facility kern

        ^

% Invalid input detected at '^' marker.

logging trap emergencies

        ^

% Invalid input detected at '^' marker.

*Jan 28 16:02:05.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.

2.3.230:5246

*Jan 28 16:02:05.999: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led sta

te 255

*Jan 28 16:02:05.999: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. In

itialising Cfg

*Jan 28 16:02:05.999: %CAPWAP-3-ERRORLOG: Failed to load configuration from flas

h. Resetting to default config

*Jan 28 16:02:16.015: %CAPWAP-3-ERRORLOG: Go join a capwap controller

*Jan 28 16:02:16.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i

p: 10.2.3.230 peer_port: 5246

*Jan 28 16:02:16.535: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully

peer_ip: 10.2.3.230 peer_port: 5246

*Jan 28 16:02:16.535: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.3.230

*Jan 28 16:02:16.535: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination

.

*Jan 28 16:02:16.535: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m

essage type 10 state 5.

*Jan 28 16:02:16.535: %CAPWAP-3-ERRORLOG: Failed to handle capwap control messag

e from controller

*Jan 28 16:02:16.535: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap pac

ket from 10.2.3.230

*Jan 28 16:02:21.535: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.3.230

logging facility kern

        ^

% Invalid input detected at '^' marker.

logging trap emergencies

        ^

% Invalid input detected at '^' marker.

*Jan 28 16:03:15.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.

2.3.230:5246

*Jan 28 16:03:15.999: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led sta

te 255

*Jan 28 16:03:15.999: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. In

itialising Cfg

*Jan 28 16:03:15.999: %CAPWAP-3-ERRORLOG: Failed to load configuration from flas

h. Resetting to default config

*Jan 28 16:03:26.011: %CAPWAP-3-ERRORLOG: Go join a capwap controller

*Jan 28 16:03:26.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i

p: 10.2.3.230 peer_port: 5246

*Jan 28 16:03:26.539: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully

peer_ip: 10.2.3.230 peer_port: 5246

*Jan 28 16:03:26.539: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.3.230

*Jan 28 16:03:26.539: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination

.

*Jan 28 16:03:26.539: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m

essage type 10 state 5.

*Jan 28 16:03:26.539: %CAPWAP-3-ERRORLOG: Failed to handle capwap control messag

e from controller

*Jan 28 16:03:26.539: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap pac

ket from 10.2.3.230

*Jan 28 16:03:31.539: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.3.230

logging facility kern

regards

Hi,

Make sure the time is set properly on the WLC or else the AP will not join.  Also make sure the country domain of the AP is defined on the WLC.  Post the entire output from the console of the AP from when you power cycle the access point.

Also Accept Self Signed Certificate (SSC) under Security/AP policy.

Paste the output of this command: debug lwapp events enable    or         debug capwap events enable

Regards

Dont forget to rate helpful posts

Hi,

Date and time is ok on the WLC,

I configured Accept Self Signed Certificate (SSC) under Security / AP policy, once done the WLC recognized the AP, but output from the console of the AP  power cycle the access point is:

IOS Bootloader - Starting system.

FLASH CHIP: Micronix MX25L256_35F

Xmodem file system is available.

flashfs[0]: 5 files, 2 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 31936000

flashfs[0]: Bytes used: 6551040

flashfs[0]: Bytes available: 25384960

flashfs[0]: flashfs fsck took 9 seconds.

Reading cookie from SEEPROM

Base Ethernet MAC address: 4c:00:82:9a:47:a3

************* loopback_mode = 0

Loading "flash:/ap1g2-rcvk9w8-mx/ap1g2-rcvk9w8-mx"...####################

File "flash:/ap1g2-rcvk9w8-mx/ap1g2-rcvk9w8-mx" uncompressed and installed, entr

y point: 0x100000

executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706

Cisco IOS Software, C1600 Software (AP1G2-RCVK9W8-M), Version 15.2(2)JB, RELEASE

SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Tue 11-Dec-12 04:52 by prod_rel_team

Initializing flashfs...

FLASH CHIP: Micronix MX25L256_35F

flashfs[2]: 5 files, 2 directories

flashfs[2]: 0 orphaned files, 0 orphaned directories

flashfs[2]: Total bytes: 31808000

flashfs[2]: Bytes used: 6551040

flashfs[2]: Bytes available: 25256960

flashfs[2]: flashfs fsck took 9 seconds.

flashfs[2]: Initialization complete.

flashfs[3]: 0 files, 1 directories

flashfs[3]: 0 orphaned files, 0 orphaned directories

flashfs[3]: Total bytes: 11999232

flashfs[3]: Bytes used: 1024

flashfs[3]: Bytes available: 11998208

flashfs[3]: flashfs fsck took 1 seconds.

flashfs[3]: Initialization complete....done Initializing flashfs.

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

memory validate-checksum 30

^

% Invalid input detected at '^' marker.

no ip http server

       ^

% Invalid input detected at '^' marker.

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

login authentication default

  ^

% Invalid input detected at '^' marker.

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Warning:  the compile-time code checksum does not appear to be present.

cisco AIR-CAP1602I-N-K9    (PowerPC) processor (revision B0) with 98294K/32768K

bytes of memory.

Processor board ID FGL1730S57A

PowerPC CPU at 533Mhz, revision number 0x2151

Last reset from power-on

LWAPP image version 7.4.1.37

1 Gigabit Ethernet interface

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 4C:00:82:9A:47:A3

Part Number                          : 73-14671-04

PCA Assembly Number                  : 000-00000-00

PCA Revision Number                  :

PCB Serial Number                    : FOC17284HL9

Top Assembly Part Number             : 800-38552-01

Top Assembly Serial Number           : FGL1730S57A

Top Revision Number                  : A0

Product/Model Number                 : AIR-CAP1602I-N-K9

% Please define a domain-name first.

logging facility kern

        ^

% Invalid input detected at '^' marker.

logging trap emergencies

        ^

% Invalid input detected at '^' marker.

Press RETURN to get started!

*Mar  1 00:00:12.451: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. In

itialising Cfg

*Mar  1 00:00:13.683: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state

to up

*Mar  1 00:00:14.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth

ernet0, changed state to up

*Mar  1 00:00:15.123: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C1600 Software (AP1G2-RCVK9W8-M), Version 15.2(2)JB, RELEASE

SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Tue 11-Dec-12 04:52 by prod_rel_team

*Mar  1 00:00:15.151: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. In

itialising Cfg

*Mar  1 00:00:15.151: %CAPWAP-3-ERRORLOG: Failed to load configuration from flas

h. Resetting to default config

*Mar  1 00:00:16.195: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan

ged state to uplwapp_crypto_init: MIC Present and Parsed Successfully

no bridge-group 1 source-learning

                   ^

% Invalid input detected at '^' marker.

%Default route without gateway, if not a point-to-point interface, may impact pe

rformance

*Mar  1 00:00:48.695: %CDP_PD-4-POWER_OK: All radios disabled - INJECTOR_CONFIGU

RED_ON_SOURCE inline power source

*Mar  1 00:00:48.923: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP addre

ss 10.2.3.100, mask 255.255.255.0, hostname AP4c00.829a.47a3

Translating "CISCO-CAPWAP-CONTROLLER.campeche.ecosur.mx"...domain server (10.2.3

.10) [OK]

*Mar  1 00:00:59.915: %CAPWAP-3-ERRORLOG: Did not get log server settings from D

HCP.

*Mar  1 00:00:59.919: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is

not established. A0203E6, 147E, A020364, A47B, 0

*Mar  1 00:01:09.915: %CAPWAP-3-ERRORLOG: Go join a capwap controller

*Jan 29 09:33:18.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i

p: 10.2.3.230 peer_port: 5246

*Jan 29 09:33:18.535: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully

peer_ip: 10.2.3.230 peer_port: 5246

*Jan 29 09:33:18.535: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.3.230

*Jan 29 09:33:23.535: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.3.230

logging facility kern

        ^

% Invalid input detected at '^' marker.

logging trap emergencies

        ^

% Invalid input detected at '^' marker.

*Jan 29 09:34:17.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.

2.3.230:5246

*Jan 29 09:34:17.999: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led sta

te 255

*Jan 29 09:34:17.999: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. In

itialising Cfg

*Jan 29 09:34:17.999: %CAPWAP-3-ERRORLOG: Failed to load configuration from flas

h. Resetting to default config

*Jan 29 09:34:28.015: %CAPWAP-3-ERRORLOG: Go join a capwap controller

*Jan 29 09:34:28.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i

p: 10.2.3.230 peer_port: 5246

*Jan 29 09:34:28.535: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully

peer_ip: 10.2.3.230 peer_port: 5246

*Jan 29 09:34:28.535: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.3.230

*Jan 29 09:34:33.535: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.3.230

and debug command output enable CAPWAP events

(Cisco Controller) >debug capwap events enable

(Cisco Controller) >*spamApTask7: Jan 29 03:39:08.092: acDtlsPlumbControlPlaneKeys: lrad:10.2.3.100(42107) mwar:10.2.3.230(5246)

*spamApTask7: Jan 29 03:39:08.093: 4c:00:82:9a:47:a0 DTLS keys for Control Plane deleted successfully for AP 10.2.3.100

*spamApTask7: Jan 29 03:39:08.100: 4c:00:82:9a:47:a0 DTLS connection closed event receivedserver (10.2.3.230/5246) client (10.2.3.100/42107)

*spamApTask7: Jan 29 03:39:08.100: 4c:00:82:9a:47:a0 Entry exists for AP (10.2.3.100/42107)

*spamApTask7: Jan 29 03:39:08.100: 4c:00:82:9a:47:a0 No AP entry exist in temporary database for 10.2.3.100:42107

*spamApTask7: Jan 29 03:39:08.104: 4c:00:82:9a:47:a0 Discovery Request from 10.2.3.100:42107

*spamApTask7: Jan 29 03:39:08.104: 4c:00:82:9a:47:a0 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 500, joined Aps =0

*spamApTask7: Jan 29 03:39:08.104: apModel:

*spamApTask7: Jan 29 03:39:08.104: apType = 38 apModel:

*spamApTask0: Jan 29 03:39:08.105: 4c:00:82:9a:47:a3 Received LWAPP DISCOVERY REQUEST to 6c:41:6a:5f:95:2f on port '13'

*spamApTask0: Jan 29 03:39:08.105: 4c:00:82:9a:47:a3 Discarding discovery request in LWAPP from AP supporting CAPWAP

*spamApTask7: Jan 29 03:39:08.105: 4c:00:82:9a:47:a0 Discovery Response sent to 10.2.3.100 port 42107

*spamApTask7: Jan 29 03:39:08.105: 4c:00:82:9a:47:a0 Discovery Response sent to 10.2.3.100:42107

*spamApTask7: Jan 29 03:39:08.105: 4c:00:82:9a:47:a0 Discovery Request from 10.2.3.100:42107

*spamApTask7: Jan 29 03:39:08.105: 4c:00:82:9a:47:a0 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 500, joined Aps =0

*spamApTask7: Jan 29 03:39:08.105: apModel:

*spamApTask7: Jan 29 03:39:08.105: apType = 38 apModel:

*spamApTask7: Jan 29 03:39:08.105: 4c:00:82:9a:47:a0 Discovery Response sent to 10.2.3.100 port 42107

*spamApTask7: Jan 29 03:39:08.105: 4c:00:82:9a:47:a0 Discovery Response sent to 10.2.3.100:42107

*spamApTask7: Jan 29 03:39:08.105: 4c:00:82:9a:47:a0 Discovery Request from 10.2.3.100:42107

*spamApTask7: Jan 29 03:39:08.105: 4c:00:82:9a:47:a0 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 500, joined Aps =0

*spamApTask7: Jan 29 03:39:08.105: apModel:

*spamApTask7: Jan 29 03:39:08.105: apType = 38 apModel:

*spamApTask7: Jan 29 03:39:08.106: 4c:00:82:9a:47:a0 Discovery Response sent to 10.2.3.100 port 42107

(Cisco Controller) >*spamApTask7: Jan 29 03:39:08.106: 4c:00:82:9a:47:a0 Discovery Response sent to 10.2.3.100:42107

*spamApTask7: Jan 29 03:39:18.104: 4c:00:82:9a:47:a3 DTLS connection not found, creating new connection for 10:2:3:100 (42107) 10:2:3:230 (5246)

*spamApTask7: Jan 29 03:39:18.638: acDtlsPlumbControlPlaneKeys: lrad:10.2.3.100(42107) mwar:10.2.3.230(5246)

*spamApTask7: Jan 29 03:39:18.638: 4c:00:82:9a:47:a3 Allocated index from main list, Index: 397

*spamApTask7: Jan 29 03:39:18.638: 4c:00:82:9a:47:a3 Using CipherSuite AES128-SHA

*spamApTask7: Jan 29 03:39:18.638: 4c:00:82:9a:47:a3 DTLS keys for Control Plane are plumbed successfully for AP 10.2.3.100. Index 398

*spamApTask6: Jan 29 03:39:18.638: 4c:00:82:9a:47:a3 DTLS Session established server (10.2.3.230:5246), client (10.2.3.100:42107)

*spamApTask6: Jan 29 03:39:18.638: 4c:00:82:9a:47:a3 Starting wait join timer for AP: 10.2.3.100:42107

*spamApTask7: Jan 29 03:39:23.636: 4c:00:82:9a:47:a0 Join Request from 10.2.3.100:42107

*spamApTask7: Jan 29 03:39:23.636: 4c:00:82:9a:47:a3 Deleting AP entry 10.2.3.100:42107 from temporary database.

*spamApTask7: Jan 29 03:39:23.637: 4c:00:82:9a:47:a0 MIC AP is not allowed to join by config

*spamApTask7: Jan 29 03:39:23.637: 4c:00:82:9a:47:a0 Join Request failed!

Hi,

From the debug it seems as if  WLC may be authorizing Lightweight APs via anAuth-list or AAA.

Check these settings here:

Web GUI > Security > AAA > AP Policies

Seems as if your AP's are set to be authorized via an auth-list or AAA,

Try unchecking the following option:

Authorize MIC APs against auth-list or AAA

dssss.PNG

Regards

Hi,

The WLC AP recognizes me, however, from the WLC did not apply the changes to the AP, such as Ap name or Location

and constantly sends this error on the console:

*Jan 29 10:48:50.531: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.3.230

logging facility kern

        ^

% Invalid input detected at '^' marker.

logging trap emergencies

        ^

% Invalid input detected at '^' marker.

*Jan 29 10:49:44.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.

2.3.230:5246

*Jan 29 10:49:44.999: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led sta

te 255

*Jan 29 10:49:44.999: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. In

itialising Cfg

*Jan 29 10:49:44.999: %CAPWAP-3-ERRORLOG: Failed to load configuration from flas

h. Resetting to default config

*Jan 29 10:49:45.011: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is

not established. A0203E6, 147E, A020364, A47B, 0

*Jan 29 10:49:55.011: %CAPWAP-3-ERRORLOG: Go join a capwap controller

*Jan 29 10:49:55.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i

p: 10.2.3.230 peer_port: 5246

*Jan 29 10:49:55.535: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully

peer_ip: 10.2.3.230 peer_port: 5246

*Jan 29 10:49:55.535: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.3.230

*Jan 29 10:50:00.535: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.3.230

Regards

Hi

Do you have teamviewer on your laptop, let me see online.(If you want then only). send me ur iD and password for teamviewer in private message .

Regards

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: