I have setup a AireSpace 2006 with 3 AP's for wireless Internet Access at my site. Our SEcurity Folks want to be able to look at the GUI as a IDS. I have found that the 2006 has IDS signatures but I cannot find what I need to configure to make the device a "quasi-IDS".
the most critical signatures are enabled when you install IDS Device Manager. When an attack is detected that matches an enabled signature, the sensor generates an alert event (formerly known as an alarm), which is stored in the sensor's event store. For further informa tion look at the following url:
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...