Aironet 1140 FLEXCONNECT External Web Authentication and Apple Devices
I'm having an issue with this Access Point.
I've configured this access point with WLC in mode FlexConnect with web authentication.
It's all right, i'm connecting with my PC in wireless, i open my web browser in windows, then the Access Point redirect me to External Web Authentication Page,
i put my credentials, and i'm redirected to my access point ( https:/126.96.36.199/login.html i accept the certificate) and then the Access Point redirect me to Internet.
I do this with my android phone, it's all right again.
I try to connect with iphone or ipad , i'm redirected to External Web Authentication Page, i put my credentials, and i'm redirected to https://188.8.131.52/login.html where the web browser don't ask me anything and i'm not redirected to Internet.
Re: Aironet 1140 FLEXCONNECT External Web Authentication and App
Well that is how the apple devices work. It opens up a small window where you login. After that you will see a success page and the you have to open up a browser on your own. You can disable the apple devices from opening up the small window, but the user then has to manually open a browser. Apple devices have the built in feature that detects if there is internet and then either opens the window for you to login or not.
Aironet 1140 FLEXCONNECT External Web Authentication and Apple D
Okay, so the user gets the portal page and enters the information. You then can see from the radius that the client is authenticated successfully (what are you using? ISE or NGS). If the radius successfully authenticates the user, then you should get the home page or the url that was initially used on the browser. You don't mention what code your running on the WLC as that might have some issue which TAC might help you find if that's a bug or not. I have ran into that issue with v7.2 or v7.3, but I can't remember.... it was a bug, but the WLC was hosting the guest portal. You have the guest portal on ISE or NGS, so you need to look at the logs to give you more info on what is going on.
Help out other by using the rating system and marking answered questions as "Answered"
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...