Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

aironet 1200 /1240 problem

I have the following problem with my APs.

I use snmpset to change an object's value. I set

the new value succesfully, but when i try to get the new value the snmp agent returns the old value.

setting....

root@teo:/home/teo# snmpset -v 2c -c demopublic 192.168.1.11 CISCO-DOT11-IF-MIB::cd11IfDesiredSsidMaxAssocSta.1 u 2

the agent reports the new value....

CISCO-DOT11-IF-MIB::cd11IfDesiredSsidMaxAssocSta.1 = Gauge32: 2

here is the problem....

root@teo:/home/teo# snmpget -v 2c -c demopublic 192.168.1.11 CISCO-DOT11-IF-MIB::cd11IfDesiredSsidMaxAssocSta.1

CISCO-DOT11-IF-MIB::cd11IfDesiredSsidMaxAssocSta.1 = Gauge32: 255 <======== the old value ======

I have tried snmpset with other objects and it works fine.

  • Security and Network Management
1 REPLY
Bronze

Re: aironet 1200 /1240 problem

From where did you try to set the snmp values?. Is it from WLSE? or if it is a light weight AP, did you try this with the WCS?

95
Views
0
Helpful
1
Replies
This widget could not be displayed.