Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Alerts

Hi Friends,

as of now we are getting on SNMP Trap on our HPopenview moitoirng system

below trap from WLC

ciscoLwappAAARadiusReqTimedOut i

NbsnAPIfDown 0x00 23 5d 0f 02 70 0 enable enable unknown access point name

can any one know about these trap.

Thanks

Vivek

4 REPLIES

Alerts

The WLC sent a request to the AAA server, and that request timed out.

You should be able to go and pull the MIBS for the WLC and load them to your OpenView server

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: Alerts

Hi Stephen,

for below alert

NbsnAPIfDown 0x00 23 5d 0e ff 80 0 enable enable unknown

and one more alert which continue coming

ciscoLwappApCrash [

what is that ????  when check on WLC and access point no issue observed.

we do same which you suggest.

thanks

Vivek

Alerts

the AP interface went down.  If you have the OID, you can go to the below link:

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=enhttp://www.cisco.com/web/go/mibs

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Alerts

Sorry i am new about this can you explain more where i got OID

297
Views
0
Helpful
4
Replies
CreatePlease to create content