I am trying to get the AP's to be authorised by the controller.
I have added a MIC entry for the AP with its 'Base Radio MAC', and then turned on Authorize AP's Against AAA, but as soon as I do that, I reboot the AP's and they do no connect, with no error on the controller to say they are rejected.
I am not using an external AAA Server, just the local MIC list.
When you enable ap authorization it sends the request to the Radius server, not the internal MIC entries. Just add the AP to the Radius server as a client using the mac-address as the username and password.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...