I am trying to segment out a locally switched guest WLAN using AP groups, to map a different interface to the same WLAN. It seems as if its mostly working....When I connect from a client it gets the correct ip address on the right subnet, but when I launch the browser I do not get the web authentication redirect page, just a 404 error.
I have an existing guest WLAN working, but as soon as I segment it out like this the web redirect doesn't work. One odd thing is I can type in my virtual ip address and I get to the login page:
Re: AP Group WLAN Interface no virtual ip redirect
I think you can open up a TAC case for this right away.. this Requires troubleshooting or some confirmation.. i am not sure whether the AP-grouping is supported with webauth.. Not sure. need to check in my lab.. but since its a weekend and i am chilling here..
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
firstname.lastname@example.org. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...