All you need to do is set the user profile to authenticate against your token server instead fo the internal CSdatabase.
You do not need to make any changes on the AP. however, you will need to install the client utilities again on the PC and select PEAP as an authentication option in the clients. You will also need to ensure you have a server side SSL certificate on your ACS.
There are some guides on CCO that will guide you through the process...
please note though, I have been trying to get this to work for a while and its proving to be very difficult!
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...