upgrade to the latest firmware.
want to setup ap1200 as a dhcp server for wireless client. but it seems there something wrong with setup. client cannot get IP address from AP. please take a look my configuration
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname xxx03
!
enable secret xxx.
!
username admin password xxx
ip subnet-zero
!
ip dhcp pool xxxpool3
network 192.168.105.72 255.255.255.248
default-router 192.168.105.65
domain-name xxxx.com
!
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid XXX WLAN
authentication open
guest-mode
!
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
rts threshold 2312
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 192.168.105.69 255.255.255.192
no ip route-cache
!
ip default-gateway 192.168.105.65
ip http server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivory/1100
bridge 1 route ip
!
!
line con 0
line vty 0 4
login local
line vty 5 15
login
!
end
