09-26-2002 06:00 AM - edited 07-04-2021 11:25 PM
I'd like to configure my AP350 via SNMP. In particular I need to configure on the AP a RADIUS server for athentication.
Does anyone know which are the MIBs to use to enable and disable the use of the RADIUS server?
Thanks in advance for your time.
10-02-2002 11:11 AM
You can only monitor the AP or upgrade firmware with SNMP. You can not make any configuration changes.
10-04-2002 04:32 AM
Hi !
in br340v8_80.mib wrote:
cfgRegNvTabBkbnDst OBJECT-TYPE
SYNTAX INTEGER {
off(1),
discard(2),
forward(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If set to off, filtering/forwarding will be determined by
the equivalent setting in the filter defaults. Otherwise
the variable determines whether those packets from the
backbone LAN, whose destination address this entry
will be discarded or forwarded.
On the 610 this is only valid for multicast entries. On a 620
this is valid for all entries."
::= { cfgRegNvTableEntry 4 }
cfgRegNvTabRadDst OBJECT-TYPE
SYNTAX INTEGER {
off(1),
discard(2),
forward(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If set to off, filtering/forwarding will be determined by
the equivalent setting in the filter defaults. Otherwise
the variable determines whether those packets from the
radio, whose destination address matches this entry
will be discarded or forwarded.
On the 610 this is only valid for multicast entries. On a 620
this is valid for all entries."
::= { cfgRegNvTableEntry 5 }
therefore in particular filters can change via SNMP!
10-18-2002 05:18 AM
Hello,
You are looking for awcAaaServerProtocol object in awcVx MIB.
awcAaaServerProtocol OBJECT-TYPE
SYNTAX INTEGER {radius(1), tacacsPlus(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol used to communicate with the AAA server."
::= { awcAaaServerEntry 2 }
You may download the MIB from CCO.
http://www.cisco.com/kobayashi/sw-center/sw-wireless.shtml
Ming
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide