Apple MAC Cannot Connect on Wireless Using PEAP Auth
I have a WLAN setup using the Cisco WiSM, Cisco ACS 4.1.3 as the Radius Server. We are using PEAP as the WLAN Security. THe issue is that all the clients who have Windows OS are able to connect to the WLAN and PEAP works fine.However the users who have Apple MAC OS are unable to connect to the WLAN that has PEAP as the Security setting. The MAC has OS 10.5.6 and I tried upgrading the image however the prob persists. On the ACS server I get in the Failed Log as "Internal Error".
Can someone help what does the Error mean , and any resolution for the issue.
Re: Apple MAC Cannot Connect on Wireless Using PEAP Auth
Can you provide some detail about how you created the user profile on the Mac? Also - did you put the ACS server's certificate into the Mac's System store so that the Mac will trust the ACS server (or configure the PEAP profile on the Mac to ignore the ACS server's certificate)?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...