Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA 9.1 policy based routing

Hello,

I would need to route default route from a specific network to a specific ip using pbr. For example I already have a default to 10.1.1.1 .. then I would need another default to 10.1.1.2 applied in ingress on a specific interface (gi0/1) for traffic coming from 192.168.1.0/24 for example, which is the network configured on interface gi0/1 of my firewall.

1 REPLY
Bronze

Hi,There is no actual PBR

Hi,

There is no actual PBR feature on the ASA's, but if your nat statements are specific to the source and specific to the outgoing interface you will be able to have policy routing via NAT, Go through the below link for alternative solution.

https://supportforums.cisco.com/discussion/11718141/asa-policy-based-routing-alternative

205
Views
0
Helpful
1
Replies