Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Assigning VLAN through WPA

Our access point is ap1240 and using radius server to authenticate users. I'm trying to assign vlan based on the user authentication by using radius attributes 64, 65 and 81 described in

http://cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a0080607188.html#wp1038739

but this seems to be not working. I am using WPA with TKIP and key rotation. If I don't set these aaa attributes users are authenticated and placed in the default vlan assigned to the SSID. If I set the attributes but keep the VLAN ID the same as the one one assigned to SSID then the user is connected no problem.

In the guide (above link) there is a note about this feature not working when cipher suite is different and if you are using WPA or CCKM. Is this what is happening with my case here?

fred

1 REPLY
New Member

Re: Assigning VLAN through WPA

120
Views
0
Helpful
1
Replies
CreatePlease login to create content