Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Autonomous to LWAPP AP upgrade tools 2.05 or 2.01

creates an empty CSV File. IE(no Ethernet MAC addresses, no certification type, and no public key hash values) any suggestions? Thanks KP

4 REPLIES
Hall of Fame Super Red

Re: Autonomous to LWAPP AP upgrade tools 2.05 or 2.01

Hi Kirk,

I remeber we ran into this right off and it was because we hadn't enabled Telnet on the WLC.

Hope this helps!

Rob

New Member

Re: Autonomous to LWAPP AP upgrade tools 2.05 or 2.01

Hi Rob, I fixed the problem. I upgraded the software on the WLC2006 to the latest version then I was able to see the Hash Key in debug. Thanks for your input. Kirk

Hall of Fame Super Red

Re: Autonomous to LWAPP AP upgrade tools 2.05 or 2.01

Hi Kirk,

Thanks for posting back with your resolution. Very often these threads just die off and you never know what the fix was. 5 points for letting us know and for great troubleshooting!

Take care,

Rob

New Member

Re: Autonomous to LWAPP AP upgrade tools 2.05 or 2.01

Hi Rob, Your welcome Kirk

222
Views
5
Helpful
4
Replies
CreatePlease to create content