Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

AVC, Netflow and Flexconnect APs

Hi all,

 

I have few questions - if anybody was solving the same problem.

My situation : few branches with Flexconnect APs (in every of them). APs are set for some SSIDs as locally switched (to save WAN connectivity) and some are centrally switched. WLC code 7.4.

 

I was very looking forward to implement AVC. AVC works fine but only on centrally switched SSID - this is a big problem.

 

Is there any chance how to export traffic info for locally switched SSID?

I was wondering if LAP can serve as Netflow source (when I'm unable to see AVC data)?

 

Any idea?

 

Thnx

4 REPLIES
VIP Purple

HI,First: AVC will not work

HI,

First: AVC will not work if  you have locally swicthed.

if you checked the local switching under the SSID, then the AP will handle the traffic on its own, without sending the packets to the WLC, hence the WLC does not know what the users are using.

2nd : http://mrncciew.com/2013/02/12/configuring-netflow-on-wlc-7-4/

 

Reagrds

Community Member

Hi, Thnx for link, know this

Hi,

 

Thnx for link, know this site.

But, I'm afraid when local switching is in action, then Netflow export from WLC will not show locally switched traffic - for the same reason as AVC. Or am I wrong?

 

Thnx

VIP Purple

AS per my knowledge: yes you

AS per my knowledge: yes you are right. Its not possible.

 

Regards

Dont forget to rate helpful posts

Silver

yes as mentioned AVC will not

yes as mentioned AVC will not work on Centrally switched network as WLC is not aware of the traffic.

just for reference check the link for complete guide.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/config_guide/b_cg75/b_cg75_chapter_010000111.html

 

**************Do rate helpful posts********************

298
Views
4
Helpful
4
Replies
CreatePlease to create content