Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Backing Up WLC Configuration

Is there a way to initiate a backup of a WLC 4400 series configuration from the CLI?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Backing Up WLC Configuration

1)log on to controller cli.

2)enter transfer upload datatype config

3)if u want to encrypt do following

a)enter transfer encrypt enable

b)enter transfer encrypt set-key

4)enter transfer upload serverip

5)enter transfer upload path

6)enter transfer upload filename

7)enter transfer upload start

8)To confirm give "y".

1 REPLY
Cisco Employee

Re: Backing Up WLC Configuration

1)log on to controller cli.

2)enter transfer upload datatype config

3)if u want to encrypt do following

a)enter transfer encrypt enable

b)enter transfer encrypt set-key

4)enter transfer upload serverip

5)enter transfer upload path

6)enter transfer upload filename

7)enter transfer upload start

8)To confirm give "y".

225
Views
0
Helpful
1
Replies
CreatePlease to create content