We would like to do some Band Select testing with different settings. Our network has the same SSID for both 2.4 and 5GHz. If we want to use a PC(laptop) and connect to the SSID, how can we then tell which band we get associated to? I know we could tell from NCS/WLC but how can we tell from the laptop (Windows 7)?
We have lots of fancy WiFi software tools, but it seems like they pick out the APs and bands separately for troubleshooting purposes so you have to select a specific AP/band to connect to. But a regular user will of course just see one SSID and connect to it and then band select kicks in.
Windows 7 native doesn't tell you what band it has connected to. The only way is to see your speed, but that isn't 100% either. Usually I will filter using the Mac address or filter using the SSID to see what devices he connected to what.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...