Bonjour Services doesn't work in WLC based wireless network
i have problem with bonjour services in Cisco WLC based network.
i have wlc 2106 running 18.104.22.168 firmware and some LAP1252 acess points.
I have 802.1x based authetication with ACS server enabled to distribute domain users in different subnets according to their privileges, but in this case in case i have problem with users in same subnet, e.g. Macbook has ip 192.168.14.10 and Iphone has 192.168.14.15 and they couldn't connect to each other using bonjour Services.
i found this on cisco site and done it but id didn't help.
A. Bonjour is a general method used to discover services on a local area network (LAN). This technology is widely used with Mac OS X and allows users to set up a network without the need to configure printers and file sharing servers (and so forth) on a LAN.
Bonjour uses broadcast, multicast, and multicast Domain Name System (mDNS) service records in order to locate devices, such as printers, other computers, and the services that those devices offer.
In order to correct this issue, use these commands to enable broadcast and multicast on your WLC:
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...