BR350 and Security Administrator

[j-egeland]

Hello all, this is my first time creating a thread and hope someone can help. We have a current setup using WGB340's. The bridges are running point-to-multipoint, three of them going to one at the lan, and no-one authenticating to them with laptops or workstations. We are going to replace them with BR350's, we have them in hand and are in the process of staging them. My problem: The original WGB340s were deployed before we had a full-time Security Administrator(who has a phobia aginst wireless) and he is unwilling to release the new BR350s for replacement. My question: Is there any specific documentation to support the security of point to multi-point bridges running with no-one authenticating to them? Also we don't have access to a radius server. Thanks in advance, Jim Egeland

[ciscomoderator]

Often times complex troubleshooting issues are best addressed in an interactive session with one of our trained technical assistance engineers. While other forum users may be able to help, it’s often difficult to do so for this type of issue.

To utilize the resources at our Technical Assistance Center, please visit http://www.cisco.com/tac and to open a case with one of our TAC engineers, visit http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.