Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Bridging Autonomous AP 1200 to LWAPP 1200 with WiSM

We have a Wism with a number of converted AP1200's on it. I have a dedicated SSID for the bridge connection. I have a AP1200 in Autonomous mode that I want to use as a WGB to bridge a machine to the LWAPP network. It was working fine when it was 2 Autonomous AP's now we coneverted the one that was attached to the wired net and the connection is not working right.

Is this even possible.

7 REPLIES
Hall of Fame Super Red

Re: Bridging Autonomous AP 1200 to LWAPP 1200 with WiSM

Hi Jeffrey,

Unfortunately, this is not supported. Have a look;

Q. Do LWAPP APs support WGB?

A. WGB functionality is only implemented on autonomous IOS APs, not on LWAPP APs.

From this doc;

http://www.cisco.com/en/US/products/hw/wireless/ps441/products_qanda_item09186a0080094644.shtml#q22

The following Cisco Aironet access points have the ability to operate as autonomous access points or lightweight access points:

Cisco Aironet 1240 AG Series Access Points

Cisco Aironet 1230 AG Series Access Points

Cisco Aironet 1200 Series Access Points that contain 802.11g (AIR-MP21G-x-K9) and/or second-generation 802.11a radios (AIR-RM21A-x-K9 or AIR-RM22A-x-K9)

Cisco Aironet 1130 AG Series Access Points

Cisco Aironet 1100 Series Access Points that contain 802.11g radios (AIR-AP1121G-x-K9)

Cisco Aironet 1300 Series Access Points/Bridges (AIR-BR1310G-x-K9 or AIR-BR1310G-x-K9-R). A Cisco Aironet 1300 Series operating in LWAPP mode only operates as an access point. This series does not support LWAPP bridging mode.

The LWAPP-capable access points listed above can be ordered configured for lightweight operation, or can be upgraded from autonomous access point mode to lightweight mode using the Autonomous to Lightweight Mode upgrade tool. Orderable access points configured for lightweight operation contain an "LAP" prefix in the part number, such as AIR-LAP1310G-x-K9. Orderable access points configured for autonomous operation contain the standard "AP" prefix, such as AIR-AP1242AG-x-K9, or "BR" in the case of AIR-BR1310G-x-K9.

From this good doc;

http://www.cisco.com/en/US/products/ps6108/prod_bulletin0900aecd80321a2c.html

Hope this helps! Sorry about that

Rob

New Member

Re: Bridging Autonomous AP 1200 to LWAPP 1200 with WiSM

I dont want to use a LWAPP AP for a WGB... I want to use an IOS ap in WGB mode to connect to a LWAPP ap as a client.

Hall of Fame Super Red

Re: Bridging Autonomous AP 1200 to LWAPP 1200 with WiSM

Hi Jeffrey,

I'm sorry I didn't really explain that very well :( The IOS AP is unable to connect to a LWAPP AP in WGB mode. You will need to use two IOS AP's for this function.

Hope this helps!

Rob

New Member

Re: Bridging Autonomous AP 1200 to LWAPP 1200 with WiSM

Release 4.1 supports this now.

Re: Bridging Autonomous AP 1200 to LWAPP 1200 with WiSM

not working for me ...

IOS AP : 1121 with IO 12.3.8.JEB1 (fat)

LwAPP : WLC 4402 v 4.1.185.0 with LAP 1240

not association

New Member

Re: Bridging Autonomous AP 1200 to LWAPP 1200 with WiSM

working for me !

IOS AP: 1131 with IOS 12.4(3g)JA1

LWAPP: WLC4404-100 v4.1.185.0 with LAP 1131 and 1242

Now trying to get it work using EAP-FAST.

Anyone tried that already ?

Re: Bridging Autonomous AP 1200 to LWAPP 1200 with WiSM

Hello all

Here are the configuration i got working:

WLC : 4.1.185

AP : 1242AG, IOS 12.4(10b)JA

WPA-PSK-TKIP

Bye

348
Views
9
Helpful
7
Replies
CreatePlease to create content