Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Bulk MACs - ACS or WLCs

I need to add about 160 client MACS for wireless access. What is the quickest way to do this? Add to ACS and then radius the wlc's to point to that list or create the list on each WLC. I ask because I am unaware of any bulk way on the 4404 or 4402.

1 REPLY
Bronze

Re: Bulk MACs - ACS or WLCs

Yes. The first option sould be the correct one to do so. Adding all MAC addresses to ACS and use WLC as AAA client to authenticate with ACS. Hence MAC Address Authentication is performed.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008084f13b.shtml#

124
Views
5
Helpful
1
Replies
CreatePlease to create content