I have a guest access setup with WISM and Anchor controllers in DMZ for internet access. L2 security policy is based on WAP2+PSK awith Layer3 on web authentication. Would it be possible to let un-authenticated users to connect to some web sites say Cisco.com (That is without being authenticated by WLC).
Sure, that is what the preauthentication ACL is for. Just create an ACL on the WLC and under the WLAN select that ACL for the preauth ACL on the layer-3 security tab. Anything that is permitted by the ACL will be allowed to pass through the controller regardless if the client has authenticated yet or not.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...