Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CA Requirement for EAP-TLS

Hello All,

 

I am aware there is a Cisco Requirement for "User certificates " and "AAA certificates" used in EAP-TLS. Does anyone know what the requirements are for the CA cetificates in EAP-TLS please?

 

Thanks.

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions

Hi,You need to have 2

Hi,

You need to have 2 certificates on client and your radius server.

First certificate is the "Root Cert" which is the same on both devices.

The second certificate is the "User Cert" which is unique for every client and aaa server.

Below you can find more details for EAP-TLS:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a008009256b.shtml

 

Regards.

2 REPLIES
VIP Purple

check this out:http://support

check this out:

http://support.microsoft.com/kb/814394

 

Regards

dont forget to rate helpful posts

Hi,You need to have 2

Hi,

You need to have 2 certificates on client and your radius server.

First certificate is the "Root Cert" which is the same on both devices.

The second certificate is the "User Cert" which is unique for every client and aaa server.

Below you can find more details for EAP-TLS:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a008009256b.shtml

 

Regards.

52
Views
0
Helpful
2
Replies