Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Call Station ID field does not contain IP address for Guest clients on WLC code 7.5

Hi all,

if anyone has experienced the below kindly share your knowledge please

*********************************************************************************

Call Station ID field does not contain IP address for Guest clients on WLC code 7.5

This missing information impacts the NGS location feature.

Workaround is to disable the Call Station ID check for the RADIUS client (WLC running code 7.5).

Fri  Sep  6 15:28:04 2013 : Error: Ignoring request to authentication  address * port 1812 from unknown client xx.xx.xx.xxx port 32769

Fri  Sep  6 15:28:08 2013 : Error: Ignoring request to authentication address  * port 1812 from unknown client yy.yy.yy.yyport 32769

thanks in advance

lance

3 REPLIES
Bronze

Re: Call Station ID field does not contain IP address for Guest

could you please elaborate more on the use case?

calling station id should be end point mac address and called station id is configurable on wlc , for ap mac:ssid, wlc mac: ssid, etc... wlc will send accounting pkts that contain client ip.

Sent from Cisco Technical Support iPhone App

New Member

Call Station ID field does not contain IP address for Guest clie

Hi Shaongin LI

before the In earlier 7.5 WLC  the IP address of a client connecting to a WLAN with no L2 but L3 security enabled was added to the RADIUS request. however now it comes up with following

_SYSTEM_

(   - a.b.c.d) User trying to authenticate from invalid location:userX 61369

09-Sep-2013   11:27:12

_SYSTEM_

Updated   guest account: userX 61369

09-Sep-2013   11:27:12

WLC Settings are

RADIUS Authentication Servers

************************************

Call Station ID Type 1 [Ip address]

MAC Delimiter [Hyphen]

1.Call station ID Type will be applicable only for non 802.1x authentication only

NGS Settings

****************

Edit RADIUS Client

Name : namex

Ip address: x.yz.a

Device Sends Calling Station IP [un tick ]

Re:Call Station ID field does not contain IP address for Guest c

He's talking about NAC Guest Services, which is a layer 3 Web Auth solution. In which case it would show the IP address in the calling station id.

Sent from Cisco Technical Support Android App

943
Views
0
Helpful
3
Replies
CreatePlease to create content