Look at the basics first... wireless systems work only with its own wireless system. Having a mix of vendors wireless will not work well, especially if you are using 802.1x. It doesn't matter if you want to use ISE, NPS, or FreeRadius. You need to provide a wireless system that works, then you can look at what radius you want to use.
Please rate helpful post and Cisco Support Community will donate to Kiva
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...