Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

can WLC manage power output of 1130 Lightweight AP

I have a infrastructure of 3500/3550 with inline power. I am planning on deploying a 4402 WLC and about 18 1130ap's. Can I manage the power output of the 1130 lightweight with the WLC ?

Will thw WLC automaticly adjust power or will I have to do it manually ?

1 REPLY
Hall of Fame Super Red

Re: can WLC manage power output of 1130 Lightweight AP

Hi Jonathan,

The Cisco Radio Resource Management (RRM) allows the Cisco Unified WLAN Architecture to continuously analyze the existing RF environments, and automatically adjust the AP power and channel configurations in order to help mitigate co-channel interference, signal coverage problems, and so on. RRM also reduces the need to perform exhaustive site surveys, increases system capacity, and provides automated self-healing functionality to compensate for RF dead zones and AP failures.

Have a look at this great Cisco doc provided by NetPro Kevin Johnson;

Radio Resource Management under Unified Wireless Networks

http://www.cisco.com/warp/public/114/rrm.html

Also,here is a really good thread that has alot of RRM "Hands on" details from NetPros John,Eric,Mark,Kevin and Aaron with some great info;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=WLAN%20Radio%20Standards&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddc5409

Hope this helps!

Rob

267
Views
0
Helpful
1
Replies
CreatePlease to create content